The ABLE 125kVA diesel generator is economical, efficient, silent, and robust, ideal for commercial or industrial power solutions. Housed in a tough-built, silenced, and compact canopy. This generator can run and withstand extreme heat conditions even in Australia’s North.
Powered by a low RPM time-proven reliable OEM 4 cylinder turbo diesel engine with three-phase 4 poles brushless synchronous alternator.
You can opt for a wireless remote start, this generator is built remote start capable.
Key Features:
| Prime Power : | 100kW / 125kVA 415Volts 175Amps |
| Standby Power : | 110kW / 137kVA |
| Power Factor : | 0.8 |
| Phase Voltage : | Three Phase 415 Volt |
| Frequency : | 50 Hertz |
| Engine : | OEM 4 Cylinder Turbo Diesel |
| RPM : | 1500/min (Electronically Speed Controlled) |
| Cooling Method : | Water Cooled - Rated For Australia's North |
| Alternator : | Three Phase 4 Pole Brushless Synchronous -/c AVR |
| Starter System : | 24 volt Electric - Battery Included |
| Controller : | Comap MRS11 |
|
2 Wire / Remote Start Capable
|
|
|
Over Temperature Protection
|
|
|
Over Current Protection
|
|
|
Low Oil Protection
|
|
| Safety Systems : | Battery Isolator |
| Emergency Stop | |
| Failsafe Shutdown Fuel Solenoid | |
| Noise Level : | 67 dBA at 7 metres |
| Fuel Tank Capacity : | 680 Litres (-/c Fuel Gauge) |
| Running Time : | 27 Hours Continuous (prime load) |
| Fuel Consumption : | 25 litres/hour (prime load) |
| Chassis Enclosure : | Lockable |
| Sound Deadening Throughout | |
| Weather-Resistant Powder Coating | |
| Stainless Steel Fittings | |
| External Use | |
| Mine Site Ready Bunding : | Yes |
| ATS (Mains Failure) : | Easy Connect Plug (ATS Box Optional) |
| Single Phase Outlets : | 1 x 15 Amp IP66 |
| Three Phase Outlets : | 1 x 20 Amp IP66 |
| 2 x 32 Amp IP66 | |
| Hardwire Terminals : | Yes |
| RCD / RCBO : | Australian Standard (IP67 Enclosed) |
| Options : | Automatic Start Systems |
|
GSM
|
|
|
Timer
|
|
|
Wireless Remote
|
|
|
Solar System Compatible (Majority)
|
|
|
ATS (Mains Failure Detection / Auto Transfer Switch)
|
|
| Minespec Padlockable Battery Isolator | |
| Weight : | 2100 kg |
| Dimensions : | 266 L x 107 W x 188 H cm |